How to Fix “This device cannot start. (Code 10)” error?

Error Code 10 is touched off when the motherboard recognizes the device but can not initiate or start it for the stoner. This can be both with external and internal factors attached to your motherboard similar as GPU, Network Adapter, Sound Card or Removable bias like Flash Drives, Printers and Keyboards. This is the result of an inharmonious motorist or a device that has conked.

this device cannot start (code 10)
this device cannot start (code 10)

Still, it’s possible that the device has not started rightly, If you installed a new tackle device and keep getting this error communication. either, an inharmonious or spoiled motorist can also lead you to this error communication, as inharmonious motorists can be installed by the erected- in Windows update when you connect a tackle device.

Generally, the error occurs on wireless network appendages and audio bias. still, the following styles are compatible with any device showing you this error communication.

1. Disable and Enable the Device

Still, that’s showing you this error communication, or it suddenly gets stops working, If you installed a new device. In both cases, you can try disabling and enabling the device, which actually has worked for the most affected druggies. When you disable the device from a device director, that device’s motorist gets disburdened from the memory (RAM). When you enable the device, the motorist gets loaded into the memory so that Windows can use that device.

In simple words, it helps in resuming the motorist, which will also renew the device. Below are the instructions to do that:

  1. Press the Windows key and type Device Manager then press Enter.
  2. Now find the driver that is causing the issue and right-click on it. Choose the Disable option.
    disable and enable device
    disable and enable device
  3. Once disabled, right-click again and Enable it this time.
  4. After doing this, go to the driver properties and check if the issue is resolved.

2. Power reset the System

When a device keeps getting disconnected or doesn’t respond, you should first try to power flush your computer or laptop. This is the stylish way to revive any device that’s unresponsive and not working.

Power flushing the computer fixes the bias that bear suddenly or unresponsively. To do so, follow the way:

  1. Shut down your computer desktop or laptop completely.
  2. Remove all the power cables from the CPU. If you are using a laptop then remove the battery.
  3. Press and hold the Power button for 15 seconds or so.
    Holding power button for 15 seconds
    Holding power button for 15 seconds
  4. Now, attach the power cables or battery back to allow the power.
  5. Finally turn on your system and see if the problem is fixed.

3. Redownload the Driver

The major reason behind any device that shows this error communication could be an inharmonious motorist installed by the erected- in Windows update mileage. Windows always have the dereliction motorists for the bias used a lot, similar as the keyboard, mouse, and other input and affair bias.

still, when Windows doesn’t have a motorist for the new device, it installs via the Windows update mileage. thus, the installed motorist can be inharmonious, which is why the error is displayed. However, downloading a motorist from the motherboard’s manufacturer’s website will fix your issue, If that’s the case.

To download a motorist from the manufacturer’s point, you need to know the model number of your motherboard or laptop. For that, follow the way:

  1. Press the Windows + R together to open the Run box on your system.
  2. Type msinfo32 in the text box and click press Enter to open the System Information Window.
  3. Check your system model, then go to the manufacturer’s website and search for compatible drivers regarding your motherboard.
    Redownloading drivers
    Redownloading drivers
  4. Download and Install the drivers again on your system to see if the issue will be fixed.

Some other things you can try if none of the above steps work. We will mention some of additional things that you can try on your own to fix the issue.

• Update the driver.
• Run the Hardware and Component Troubleshooter.
• Restart Windows Audio Service (For High-Definition Audio Device).
• Plug your device into another port.
• Use a System Restore utility.
• Check for hardware problems.

Back to top button